Position Title: CNC Operator

Wage: $16.00 per hour

Shift: 1st

Hours: 6:00am-4:00pm

QPS Employment Group has a great opportunity available for a CNC Operator at a company in Racine, WI. This is a temp to hire CNC Operator position for 1st shift.

Responsibilities include but are not limited to:
- Produces machined parts by operating a computer numerical control (CNC) machine, performing a standard series of progressive machining operations to close and exacting tolerances.
- Changes tools and assists with or performs standard set-ups.
- Following detailed instructions, operates CNC and other machines to perform standard and repetitive sequences of operations where programs are proved and setups made and maintained by others
- Drilling, boring, milling, turning and balancing, as required
- Working from detailed process instructions
- Using precision measuring instruments or limit gauges to check machine positioning
- Inspecting your own work for quality
- Meeting rate for each part, while maintaining quality
- Maintaining a clean work environment
- Taking responsibility for equipment care and basic maintenance
- Assisting other operators as needed
- Recognizing own capabilities and taking initiative to continually improve
- Performing other duties as assigned

Requirements:
- This position requires continuous standing and intermittent walking, bending, sitting, pushing/pulling and lifting of parts that may at times be in excess of 50 pounds
- Machining fundamentals and basic operation skills
- Shop arithmetic
- Print reading and measuring procedures
- Ability to work individually or as part of a team
- Enthusiastic, cooperative and positive behavior
- Two years of shop-related high school or vocational education, supplemented with on-the-job training in applied machine shop

Benefits:
- Available upon hire

bkuhn@qpsemployment.com

IND123

Position Title: CNC Operator - 2nd Shift

Wage: $16.00-$17.00 per hour

Shift: 2nd

Hours: 4:00pm-2:00am

QPS Employment Group has a great opportunity available for a CNC Operator at a company in Racine, WI. This is a temp to hire CNC Operator position for 2nd shift.

Responsibilities include but are not limited to:
- Produces machined parts by operating a computer numerical control (CNC) machine, performing a standard series of progressive machining operations to close and exacting tolerances.
- Changes tools and assists with or performs standard set-ups.
- Following detailed instructions, operates CNC and other machines to perform standard and repetitive sequences of operations where programs are proved and setups made and maintained by others
- Drilling, boring, milling, turning and balancing, as required
- Working from detailed process instructions
- Using precision measuring instruments or limit gauges to check machine positioning
- Inspecting your own work for quality
- Meeting rate for each part, while maintaining quality
- Maintaining a clean work environment
- Taking responsibility for equipment care and basic maintenance
- Assisting other operators as needed
- Recognizing own capabilities and taking initiative to continually improve
- Performing other duties as assigned

Requirements:
- This position requires continuous standing and intermittent walking, bending, sitting, pushing/pulling and lifting of parts that may at times be in excess of 50 pounds
- Machining fundamentals and basic operation skills
- Shop arithmetic
- Print reading and measuring procedures
- Ability to work individually or as part of a team
- Enthusiastic, cooperative and positive behavior
- Two years of shop-related high school or vocational education, supplemented with on-the-job training in applied machine shop

Benefits:
- Available upon hire

Position Title: Electrical Assembler

Wage: $12/hr.

Shift: 1st

Hours: 5am-1:30pm; Mandatory OT

QPS Employment Group has an amazing 1st shift opportunity for an Electrical Assembler at a facility in Pleasant Prairie, WI. This well-established company specializes in light fixture products. They offer long-term-to-permanent opportunities for the right individuals who are looking for a career to contribute, grow and develop in the company. This is a temp to hire Electrical Assembler position.

Responsibilities include but are not limited to:
- Work with pneumatic hand tools
- Read blue prints/schematic’s
- Wire and install doors using silicone, adding gaskets, adding brackets, building subassemblies, testing of finished product, etc.
- Average 3-20 fixtures per hour, depending on components
- Perform very repetitious but some functions will vary

Requirements:
- Assembly experience (electrical, motors, machine, appliances, etc.)
- Must be able to adapt to schedule changes and lots of OT
- Must be able to stand for up to 10 hours a day
- Have a sense of urgency
- Attention to detail
- Team-oriented
- Basic computer skills
- Basic math and measurement skills
- Good communication skills
- Good problem solving skills
- Able to work in a fast paced environment
- Able to stand, sit, walk, bend, twist, grip, reach, push and pull throughout shift
- Able to lift up to 50lbs
- Able to work independently and in a team

KenoshaPC@qpsemployment.com

IND123

Position Title: Order Picker

Wage: $14/hr.

Shift: 1st, 2nd, 3rd

Hours: Weekend/F-Sun., 1st shift (6am-2:30pm); M-F, 1st shift (6am-2:30pm), 2nd shift (2pm-10:30pm), 3rd shift (10pm-6:30am)

Want to be involved with amazing products? Looking for year-round work, steady hours, a clean workplace, and great coworkers? We have the perfect job for you! We’re hiring for an Order Picker in Kenosha, WI. This Order Picker position is temp to hire. Openings on all shifts.

Responsibilities include but are not limited to:
- Move freight, stock, and other materials to and from storage and production areas, loading docks, delivery vehicles, and containers, by hand or using trucks, tractors, and other equipment
- Sort cargo before loading and unloading
- Attach identifying tags to containers, or mark them with identifying information
- Read work orders or receive oral instructions to determine work assignments and material and equipment needs
- Record numbers of units handled and moved, using daily production sheets or work tickets
- Install protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported
- Direct spouts and position receptacles, such as bins, carts, or containers so they can be loaded
- Maintain equipment storage areas to ensure that inventory is protected
- Carry needed tools and supplies from storage or trucks, and return them after use

Requirements:
- Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as lifting, balancing, walking, stooping, and handling of materials
- Ability to exert maximum muscle force to lift, push, pull, or carry objects
- Ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without 'giving out' or fatiguing
- Ability to coordinate 2 or more limbs while sitting, standing, or lying down; does not involve performing the activities while the whole body is in motion
- Ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects
- Associate will be required to lift 7-70 lbs. approximately 6-8 hours in an 8 hour work day

Benefits:
Available upon hire into company

kenoshapc@qpsemployment.com

IND123