Position Title: Blow Mold

Wage: $13.00-$14.00 per hour

Shift: 1st, 2nd, 3rd 

Hours: 8 hours

Are you looking for over time? Wanting to work in a fast paced work environment? This job might just be for you! This company is looking for trimmers, and machine operators for their injection blow mold department. You will be watching parts come out every 60 seconds or less, trimming flashing off the part, then setting aside for the part to cool. Not only will you need to be able to work fast paced, but you will need a good fast paced hand-eye to go over the part for quality inspection before moving onto the next part. Sounds like a lot, however it makes your work day fly by when you are this busy. This company is currently looking for all shifts, however if a shift is filled you are able to bid in on any position posted from day one. Apply today or contact the Fairfield office to hear more.

Responsibilities include but are not limited to:
- Pull plastic product from machines.
- Visually inspect product for defects and tear off excess flash if applicable by using safety knife.
- Stack finished product on top of each other for packaging.
- Observe machine for jamming parts.
- Verify products with correct job order.
- Separates scrap materials from trash and puts them in proper bin.
- Maintain cleanliness around work station.
                                                                     
Requirements:
- Must be able to stand 8 hours.
- Must be able to occasionally lift and/or move up to 25lbs.
- Injection blow molding experience preferred.
- Must have a great hand/eye coordination.
- Must be able to pass QPS pre-employment screening.

Benefits:
- Available upon hire.

Position Title: Machine Operator

Wage: $13.50 per hour

Shift: 2nd; 3rd

Hours: 8-hour shifts 

Are you tired of working for a company that does not truly appreciate your hard work? Are you looking for a company that not only tells you that you are appreciated but shows it? How about a company that loves to promote from within? Do you have a great work ethic, determination, and a positive attitude to get any job done? Then this is the position for you! This company is an injection blow molding company that is continuing to expand. Starting with fuel tanks, slides, and parts for many more specific customers that travel to all over the world. The possibilities are endless! Starting as a Machine Operator on 2nd or 3rd shift opens up the possibility for you to advance into whatever future you desire. Maybe Engineering and Design? Sales? Clerical? Apply today so you can start your future career! You do not want to miss out!

Responsibilities include but are not limited to:
- Cutting, trimming, and welding parts with equipment including saws, robots, pneumatic tools and dedicated fixtures.
- Trim excess material off of parts using knife and removing part from work station with push stick when operating BC Bandsaw.
- Installing components as stated in the work instructions using various equipment.
- Verify that all required components are installed on part before packaging.
- Inspect the parts for quality and reject all non-conforming parts and place them in designated area.
- Minor adjustments on Blow Molding Equipment.
- Maintain a clean and safe work environment.

Requirements:
- Must be able to lift up to 50 non repetitively.
- Must be able to lift 10-20lbs repetitively.
- Must be able to stand for an extended period of time.
- Must be able to perform basic mathematics.
- Must be able to read and follow work instructions and directions.

Benefits:
- Paid holidays and more available once hired on.

fairfield@qpsemployment.com

IND123

Position Title: Production

Wage: $10.50 per hour

Shift: 1st

Shift: 7:00am-3:30pm

Do you need job security? Where you know you aren't getting laid off due to lack of work? This company could be the right fit for you. Consistent work hours, 8-10 hour shifts depending on orders, and sometimes overtime on weekends. This company is known for making traffic cones, barrels, panels and much more safety devices. They are looking for hard workers that can keep up with production. You will be conducting quality checks, wrapping the safety devices with reflective tape and more. Don't miss out on this opportunity today as they do promote within! Apply today or contact your Fairfield Office.

Responsibilities include but are not limited to:
- Set cones on a rotating rack for the flame treated machine to open up plastic pores on each cone.
- Attach sticker to cone for job order specification - cut off access sticker with retractable utility knife.
- Group and sort striping and sheeting to cones.
- Observe cones for material defects.
- Verify product with correct job order.
- Maintain cleanliness around work station.
                                   
Requirements:
- Must be able to stand alternating sitting for 8 hours at a time.
- Must be able to occasionally lift and /or move up to 10 lbs.
- Must have great hand/eye coordination.
- Must be able to pass QPS pre-employment screening.

Benefits:
- Available upon hire.

Position Title: Roto Mold Machine Operator

Wage: $13.00-$14.00 per hour

Shift: 1st, 2nd, 3rd

Hours: 8-hour shifts 

Do you want to be a part of a company that produces products that are made in America and saves lives? Are you looking for a company that prides itself on working as a team? Then working in the Roto Mold department with this company is the perfect fit for you. They are looking for reliable, dedicated, and hardworking candidates that are looking to start a career. This company prefers to promote from within so the opportunities are endless.

Responsibilities include but are not limited to:
- Set up machines and equipment utilized for plastic molding.
- Verifies set up of plastic molding machines, including proper mold alignment and curing temperatures.
- Initiates changes in molds and core alignment, and timing cues of casting machine to correct defects.
- Reject non-conforming parts as needed and places them in designated areas.
- Trim and deburr excess parts.
- Recommend measures to improve production methods, equipment performance and quality of products.
- Follows appropriate safety regulations, and maintains a clean work area.

Requirements:
- Must be able to stand for 8 hours.
- Must be able to occasionally lift and/or move up to 100lbs.
- Must be able to repetitively up to 25lbs.
- Injection blow molding experience preferred.
- Must have a great hand/eye coordination.
- Must be able to pass QPS pre-employment screening process.

Benefits:
- Available upon hire.